PermitsHubPermitsHub

Do I Need a Permit?

Do I Need a Permit for a Fence in Markham's Unionville or Cornell?

Most Markham fences don't need a building permit, but that doesn't mean you can build anything. The city's fence by-law caps height by yard and around corners. Unionville and Markham Village add a heritage layer. Cornell lots often come with builder fencing and subdivision terms you can't touch. Here's how to tell which rules apply to your lot before the posts go in.

By PermitsHub Team10 min read

Key Takeaways

  • An ordinary wood or vinyl fence in Markham usually needs no building permit, but it must still follow the city's fence by-law, which sets different height limits for front yards, rear and side yards, and corner sight triangles.
  • Inside the Unionville and Markham Village heritage conservation districts, a fence visible from the street can need heritage approval even though no building permit is required, so check with Markham's Heritage Section before ordering materials.
  • Cornell lots often carry subdivision agreements, builder-installed fencing, noise walls and laneway sightline rules that limit what an owner can remove, raise or replace.
  • A fence becomes a permit project when it encloses a pool, forms part of a raised deck or sits on top of a retaining wall, and those cases should be designed and reviewed before construction.

Markham Fence Rules Decoded

In most cases, no: a standard backyard fence in Markham does not need a building permit. It does have to comply with the City of Markham's fence by-law, which limits height differently in front yards, rear and side yards, and the sight triangle at a corner or driveway. If your home is inside the Unionville or Markham Village heritage conservation district, a fence visible from the street may need heritage approval even with no building permit involved. In Cornell, your subdivision agreement and the builder's original fencing plan often decide what you're allowed to change.

So the real question isn't "do I need a permit" but "which set of rules governs my lot." Most Markham homeowners get caught by the second or third layer. Very few get caught by the first.

Front Yard, Rear Yard, Corner: How Markham's Fence By-law Sets Height

Markham regulates fences through a stand-alone fence by-law, separate from the zoning by-law and separate from the Ontario Building Code. That's why there's no building permit for a typical fence. The by-law is enforced by the city's By-law Enforcement and Licensing staff, and enforcement is almost always complaint-driven. Nobody inspects your fence when it goes up. Someone calls when it bothers them.

The by-law treats three zones differently, and they're worth understanding before you sketch anything.

  • Front yard: the space between the front wall of the house and the front lot line. Fences here are kept low, roughly at a decorative or waist height, so the streetscape stays open. A full privacy fence across a front yard is not allowed.
  • Rear and interior side yards: this is where taller privacy fences are permitted. The limit is at a typical backyard privacy fence height, and the by-law specifies how height is measured from grade.
  • Sight triangles: on a corner lot, and where a driveway meets a sidewalk or road, there's a triangle of land where fences, hedges and other obstructions must stay very low so drivers and pedestrians can see each other.

The exact height figures, how lattice toppers count, and how the triangle is measured are set in the current by-law text. Markham has amended its fence rules over the years, so confirm the numbers against the version on the city's website or with By-law Enforcement before you build. Don't rely on what a neighbour was told a decade ago.

The corner lot trap

Corner lots cause more fence complaints than anything else we see. Owners treat the long side along the flanking street as a side yard and run a full-height privacy fence right to the corner. That side is often an exterior side yard with its own rules, and the last stretch near the intersection falls inside the sight triangle. The fix after a complaint usually means cutting the fence down or pulling posts back, which costs you twice. If you're on a corner, measure the triangle on site and mark it with stakes before the fence contractor shows up.

Fence complaints are rarely about height in the abstract. They're about the corner where a driver can no longer see a kid on a bike.

Unionville and Markham Village: When Heritage Review Is the Real Approval

Unionville and Markham Village are both designated heritage conservation districts under Part V of the Ontario Heritage Act. Markham also has HCDs in Thornhill and Buttonville. Inside an HCD, the district plan governs changes to the property, and that plan includes guidance on fences, gates and landscape features. Changes that need approval go through a heritage permit, reviewed by the city's Heritage Section staff and, for anything beyond minor work, by the Heritage Markham advisory committee before a decision.

This is where homeowners get surprised. A fence doesn't need a building permit, so they assume it needs nothing. In an HCD, a new front or side fence facing the street can be a change the district plan expects to review. The plans favour traditional materials and forms that suit the historic streetscape. On Main Street Unionville and the older residential streets around it, think low wood picket fences, simple board fences in rear yards, and gates that match. Chain link, tall vinyl privacy panels and modern horizontal slat screens in a front yard are the sort of thing staff will push back on.

How strict the review is depends on two things: whether the fence can be seen from the public street, and whether your house is a contributing heritage property in the district plan. A rear-yard fence screened behind the house on a non-contributing lot may get a quick answer from staff. A front-yard fence on a designated Victorian house on George Street or Main Street Markham will get a closer look. The district plans also distinguish between replacing a fence like for like and introducing something new, so describe exactly what's there now and what you want.

What to have ready for heritage staff

  • Photos of the existing fence and the streetscape on either side of your lot.
  • A simple site plan showing the fence line, gates and height, ideally drawn on your property survey.
  • A material and style description, or a manufacturer's sheet or sample photo.
  • A note on whether this is a like-for-like replacement or a new design.

Call the Heritage Section before you sign with a contractor. Confirm with them whether a heritage permit is required for your specific fence and how long review is currently taking. Fence season and committee schedules don't always line up, and you don't want a crew booked for a week you can't use.

Cornell: What Your Builder and Subdivision Agreement Already Decided

Have a project in mind? Get an honest, no-pressure permit review from PermitsHub.

Cornell was planned as a traditional neighbourhood: homes pulled close to the street, front porches, and rear laneways with detached or attached garages at the back. That design changes the fence conversation completely. Front yards are shallow, so there's little room for a front fence at all. The private outdoor space is often a small courtyard between the house and the garage, and that's where owners want privacy.

Three things limit what Cornell owners can do, and none of them are the fence by-law.

  • Subdivision agreements and architectural controls: builders sign agreements with the city, and many purchase agreements carry restrictions about fencing style, colour and location, especially in the first years after closing. Some are registered on title. Read your closing documents and the warning clauses before you change a builder fence.
  • Builder-installed and noise attenuation fencing: lots backing onto Highway 7, Ninth Line, Donald Cousens Parkway or similar roads often have acoustic fences or walls installed as a condition of the subdivision. These can sit on city land or have specific maintenance terms. You generally can't remove, cut openings in or attach things to them.
  • Laneway sightlines: where your garage apron meets the lane, the same visibility logic as a street corner applies. Tall fences or screens right at the lane edge block sightlines for cars backing out, and the lane itself is often city-owned, so your fence can't creep onto it.

Grading is the other Cornell issue. On newer lots, the builder's grading plan uses swales along side and rear lot lines to move water. A fence with a solid base or a gravel-board strip sitting in the swale can dam water and send it into your neighbour's yard or yours. If your lot is still under the builder's grading warranty or the city still holds grading securities, a fence that alters drainage can create a problem at final grading sign-off.

We've worked on a fair number of Cornell properties, mostly coach houses over laneway garages and rear additions, and the same pattern shows up: the title documents and subdivision terms are the first thing to read, not the last.

When a Fence Does Need a Building Permit

A fence crosses into permit territory when it's part of something else that's regulated. These are the cases where you should stop and get drawings.

Pool enclosures

Markham regulates pool enclosures under its own by-law, and a fence that forms the pool barrier needs a pool enclosure permit before the pool is filled. The enclosure has to meet rules on height, climbability, gaps and self-closing, self-latching gates. If your existing backyard fence is going to serve as the pool barrier, it has to meet those standards too, which often means replacing gates or lattice that a child could climb.

Privacy screens on decks

A privacy screen attached to a raised deck is treated as part of the deck. Under the Ontario Building Code, a deck more than 600 mm above grade, or one attached to the house in certain configurations, needs a building permit. A tall screen also adds wind load to the deck posts, and examiners will want to see how the posts and footings handle it. Screens on decks close to a property line can also run into zoning setbacks for the deck itself.

Fences on retaining walls

The Ontario Building Code requires a permit for retaining walls over 1,000 mm in height that are next to public property or provide access to a building. A fence mounted on top of a wall also changes how height is measured under the fence by-law, and the wall has to be designed for the added load from the fence. On the sloped lots near the Rouge valley or older parts of Unionville, this combination comes up more than people expect, and properties near valleylands may also fall under TRCA regulation.

For deck screens, retaining walls and pool enclosures, PermitsHub prepares the drawings and handles the submission, so the structure, setbacks and barrier details are sorted before anyone digs a post hole.

Neighbours, Property Lines and the Mistakes That Lead to Complaints

Most fence trouble in Markham starts with a neighbour, not the city. A few habits prevent almost all of it.

  • Find your survey and locate the property line before you build. Fence contractors will set posts where you point. If you're wrong, the fence is on your neighbour's land.
  • Talk to the neighbour about a shared boundary fence before you build. In Ontario, the Line Fences Act sets out a process for disputes over shared boundary fences, but agreeing in writing on location, style and cost split is far simpler.
  • Call Ontario One Call for utility locates before digging. Cornell and newer subdivisions have shallow services and easements along lot lines.
  • Keep the finished side facing out if the by-law or your subdivision terms require it, and check whether gates can swing onto a lane or sidewalk.

The fence by-law is easy to read. Your survey, your title documents and your neighbour are where fence projects actually go sideways.

A Quick Way to Decide Which Rules Apply to Your Lot

Have a project in mind? Get an honest, no-pressure permit review from PermitsHub.

Work through it in this order. First, check whether your property is inside the Unionville, Markham Village, Thornhill or Buttonville HCD using the city's heritage maps. If it is, call the Heritage Section before anything else. Second, if you're in Cornell or any subdivision built in the last couple of decades, read your purchase agreement, title warnings and any builder fencing plan. Third, check the fence by-law for your yard type and measure any sight triangle on site. Fourth, ask whether the fence is a pool barrier, attached to a deck or sitting on a retaining wall, because any of those turns a simple job into a permit.

If you get through all four with no flags, you're likely building a straightforward by-law-compliant fence that needs nothing more than a good survey and a reliable contractor.

Do I Need a Permit?

1
›
2
›
3
›
4

What are you planning to build or renovate?

Ready to move forward? PermitsHub handles permit drawings, submission, and revisions - flat-rate, GTA-wide.

Related Reading

More in this category

Do I Need a Permit?

FAQ

Related questions

Get started

Tell us about your project.

Free, no-pressure quote within one business day.

● Flat-rate quotes - no surprise fees

● Revisions included until approval

● Most enquiries responded to same day

Free Home Permit QuoteNo commitment · 30 sec
1
2
3

What are you building?

SCROLL TO SEE ALL 20 PERMIT TYPES

Prefer to call? 647-961-4070
CALL NOWFree Home Permit Quote30 SECONDS - NO COMMITMENT